A NEW DIMENSION OF MODEL MAKING – THE PRECISE AND VERSATILE QBOT MINIMILL KIT!
The QBOT MINImill KIT enables you to easily manufacture precise parts in your workshop. The following videos show you the capabilities of the MINImill KIT.
Take a look and be impressed by the performance of the MINImill KIT!
EASILY MILL YOUR PARTS FOR MODELMAKING
The QBOT MINImill KIT is made for foam, plastics and wood. However our milling machine is sturdy enough for your occasional mill job in Aluminium.
The milling paramters in the video are: Singleflute Endmill with a diameter of 3mm, Feedrate: 300mm/min, Depth of cut: 0.75mm
We recommend milling Aluminium only with high quality Endmills.
PRECISE MILLING OF SIKA MODELING FOAM
The MINImill KIT is capable of milling precise parts out of modeling foam. Just load your STL file and start the mill job.
The milling parameters in the video are: Singleflute Endmill with a diameter of 3mm, Feed: 2500mm/min, Depth: 8mm per pass
Mill your vacuum casting, deep drawing moulds or prototypes fast on the MINImill KIT!
PCB, CFK OR GFK MILLING
The QBOT MINImill KIT capable of milling your parts precisely out of reinforced plastics.
The milling paramters in the video are: Endmill with a diameter of 2mm, Feedrate: 2500mm/min, Depth of cut: 2mm
Mill your reinforced parts easily on the MINImill KIT in your workshop. Depending on your material, we recommend a dust collection system or milling your parts under water to prevent dangerous dust formation.